A Number Of automatic plastic pyrolysis plant Suggestions You Must Conform With

HuaYin chinese tyre recycling plant Exclusive Characteristics: 3. Anti-block device. It can avert the block in the reactor. 4. Expert thermometer, pressure gauge and safety valve. five.It is hazardous to burn exhaust gasoline(C1 to C4) without having any safety actions. In our approach, it is transferred very first by way of the security device and a safety spray gun. Ahead of burning, we should ensure the basic safety of production.

Environmental helpful facets of : one. Squander fuel: Transferred through two basic safety unit: h2o shut &burning air nozzle. Entirely burnt, not only eradicated pollutant but also minimized the amount of fuels. For smoke dust discharge, in waste plastic to diesel procedure, we utilize collection devices of ZTC Desulphurization and dust remover which could control the smoke dust discharge quantity satisfy relative requirements of GB-2001.

   2.Waste liquid: Developed waste acidic h2o in the approach of oil disposing (50kg approach from 1 ton of oil simple to procedure for small amount). counteract the liquid by alkalescent liquid resolution.Soon after 3 stage of filtration, the litmus-less squander water was introduced to evaporator (use the warmth of the flue of principal processor as its heating resource)

3. Waste reliable. The strong residua will be remaining soon after the catalyst splitting from scrap plastic, roughly composes the squander plastic excess weight about 5%to 10%. Its principal component is the thick black carbon. It can be the raw material of the creation market of black carbon. Also could be blended with the pulverized coal ash which create the uncooked content thermal electrical power plant, also could be the uncooked material of manufacture pulverized coal ash brick (1 variety of environmental defense constructing materials).

Data Description: 

one. The uncooked supplies: squander tires,plastics and rubber two. Total Potential: 5 tons/working day, eight tons/working day,ten tons/day, 12 tons/day three. the size of reactor:2.2m*6m,two.6m*6m, two.8m*68m, two.8m*6.6m four.Typical crude oil: 45% five.Typical carbon productiveness :35% six. Typical metal efficiency: All around 10%, relies upon on the tire kind 7.Common fuel productivity: five%-10% eight. The decompose temperature: maximum temperature is 380-400 diploma Cm 9. Coal or firewood expense: 60kg or 70kg ten.Discharging time: two-three several hours eleven.Feed in time: two hour 12.Reactor depth-ratio: two/3 minutes 13.Layout force: .04 Mpa

Procedure Process: 

Very first, the raw materials are put into the reactor, and then seal the feeding in doorway, afterwards start the device and the reactor will be rotating and heated by coal, natural fuel, wooden or electrical power. When the temperature reaches the diploma of 250 to 280, we will get the crude oil, the oil steam will be constant created until finally the temperature reaches 350-460°C oil steam will circulation through oil gasoline separator, gentle ingredient will enter the condensers and in the meantime the large oil will be discharged instantly into in heavy oil tank. The liquefied element will be condensed as crude oil, and the part which cannot be liquefied will be transferred by the h2o seal back again to the burning chamber to be reused as heating substance.